Steel Hands 35

The anchor winch SH 35 is designed for installation on boats and boats up to 7 meters long. An anchor rope 40 meters long with a thickness of 4 mm and a winch wound around the spool is supplied with the winch. The breaking load of the anchor rope is 360 kg. The winch cover is made of a durable ABC plastic which is not afraid of the effects of ultraviolet rays, as well as sudden temperature changes. The complete set includes a roulette, fasteners, power cable. Details of the winch mechanism are made of durable steel with galvanic coating. The winch has a quiet working mechanism. In this model, in contrast to the SH 35 PRO model, there is no “smooth entry function of the anchor in the water”. When the anchor reset button is pressed, the anchor leaves the roll and in free fall rushes into the water. Thanks to the “free anchor reset” function, within a few seconds it reaches the bottom. The entire mechanism of the anchor winch is implemented mechanically, which significantly increases the reliability of the mechanism and, in general, the winch itself. The SH 35 anchor winch has a 120-watt motor.For correct operation of the anchor winch, the recommended weight range of anchors is (18-30 LB) (8-14 kg). 

Technical description 

1. Winch body
The winch frame, as well as all the brackets (Steel Hands 35 models), are made of strong steel.

2. Winch mechanism (for lifting and dropping the anchor)
The mechanism of the winch consists of: an engine with a closed gear mechanism and a mechanical drive to effect the movement of the coil along the shaft. All mechanical parts involved in the operation of the winch are lubricated with a special water-repellent lubricant.

3. The electrical part
The electric part of the winch uses a 120 Watt motor with a working voltage of 12 V. On the cover (Steel Hands 35), a fixed three-position, waterproof button is mounted on the bed (Steel Hands 35). In the complete set the wire for connection of a winch to the storage battery in length of 5 meters and the thermal safety relay is delivered.
4. The top winch cover for Steel Hands 35
The winch cover is made of a durable UV-resistant ABC plastic. On the winch cover there is a winch control button.

5. Steel rope winch Steel Hands 35
The winch of the winch is made of strong steel 3 mm thick. The roller is equipped with a rolling roller made of durable plastic.

6. Anchor rope
The winch is equipped with a kapron rope 40 m long, with a tensile force of 360 kg.

7. Fasteners
The winches are supplied with fixing galvanized bolts and nuts for fixing the winch and roulette body.

For correct and durable work of the winch, we recommend using STRONGER anchors!

Anchor winch includes a roller and the winch itself. Using the anchor winch is prohibited without regular roller!

Specification:

Maximum anchor weight - 15 kg

Length of boat, up to - 7 m

Anchor rope - ∅ 4 mm, length 40 m

Roller - yes

Control button - yes

Control button function - ascent / descent

Rod for safe transportation of armature - yes

The function of a smooth entry of the anchor into the water - no

Free anchor reset - yes

Armature lifting speed- 30 m/min

The weight - 9 kg

Package size (LxWxH) - 377×307×177 mm

Winches Dimensions SH-35 (LxWxH) - 280х290х160 mm

Dimension of the railways SH-35  (LxWxH)  - 260х82х129 mm

Guarantee- 1 year

Max. Working load - 90 kg